band saws band saw parts bandsaw faq rollin saw testimonials about rollin saw contact rollin saw
The Original Band Saw
| Price, Technical Data, Features, Options | Parts | Printable Page (Requires Acrobat) |

EF1459 Vertical Band Saw Here’s “The Original” - Model EF1459 – The Vertical Band Saw that Cuts Metals, Plastics and Woods Safely and Efficiently

Roll-In Saw built its reputation on the versatility and durability of this terrific band saw – the EF1459, a.k.a, “The Original.”  This was the first saw in America to use a patented gravity-feed system that saves time and energy. 

The EF1459 is actually a horizontal band saw on a vertical frame.  An all-purpose band saw, it handles all metals, plastics, and woods in a wide variety of cuts.  It is a fast, accurate cut-off machine that is perfect for notching, slitting, and slotting.  A reliable addition to your shop floor, this band saw doubles as a contour, profile, and rip saw.

Accurate Gravity Feed

The EF1459 band saw has a capacity of 14½ inches under the guides and a 9 inch cut.  The blade and vertical column travel on an inclined track that feeds into the cut in a straight path.  Gravity enables the blade to find its most efficient feed rate.  Counterweight control provides adjustment for optimum cutting pressure and long blade life.  The work piece remains stationary and your hands need not be in the cutting area during cut-off, an important safety feature.

EF1459 Vertical Bandsaw back viewHydraulic Feed Control and Blade Shield

The Roll-In Saw Vertical EF1459 is equipped with a hydraulic safety feed regulator and adjustable saw blade guard.  An adjustable stop can be pre-set to control the depth that the blade travels into the work.

High Quality Yet Cost-Effective

The Roll-In Saw EF1459 is equipped with a large, rigid 18 ½ inch x 30 inch precision-ground table.  Hardened grooved roller guides allow blades from ¼ to ¾ inch wide without adjustment.  Blade wheels have rubber tires to prevent blade slippage.  The band saw comes furnished with an angle plate swivel work block, large C-clamp, blade/speed selector chart, blade, one horsepower motor and switch.  It is available in either 110V or 220V single-phase, or 220V or 440V three-phase options.

 EF1459 Vertical Band Saw Table

Price:  $4,795.00

Technical Data
Capacity Under Guides
14 ½”
Throat
8 ¾”
Blade Travel
9” Blade travel into work
Blade Size
3/4” Width x 8/12T x 10' Length .035 thick (bi-metal)
Guards
Covers 4 step pulleys, blade and lower wheel
Guide Rollers for Blade Width
1/4”, 3/8”, 1/2”, 5/8” and 3/4”
Blade Speeds
70, 140, 270 and 525 fpm
Table
Precision ground, cast iron table, 18 ½” x 30”
Table Height 30" from floor
Wheels
Cast iron, 14” x 1 1/8”
Wheel Tires
Replaceable rubber
Motor
1 HP, 110/220V, 60-cycle single-phase; 1 HP 220/440V, 60 cycle three-phase
Dimensions
30” Width x 66” Height x 40” Length
Shipping Weight
650 lbs. F.O.B Cleveland, Ohio

Optional Equipment
1” Guide Rollers
$116.00
Casters 4 Per Set
$127.00
Chip Dust Blower
$84.00
Contour Guide Assembly
$135.00
 
Saw Master® Accessory Package
$415.00
Factory Installed Work Light
$87.00
1" Welder, Grinder and Shear/Bench Model
$2450.00
   

(Specifications subject to change without notice)
One Year Limited Warranty

Replacement Parts for your EF1459 Vertical Band Saw

Roll-In Saws are available through a network of distributors.  To find a distributor near you, click here.


Locate Roll-In Band Saw Distributor

Roll-In Saw Band Saws
vertical band saw
Model EF1459
Vertical All-Purpose Band Saw (Parts)
horizontal miter bandsaw
Model HM1212
Horizontal Miter Band Saw (Parts)
Horizontal Wet Mitre Bandsaw
Model HW1212
Horizontal Wet Miter Band Saw (Parts)
horizontal swivel band saw
Model HS1418
Horizontal Swivel Band Saw (Parts)
Deep Throat Vertical Band Saw
Model DT1340
Deep Throat Vertical Band Saw (Parts)
vertical economy bandsaw
Model JE1320
Journeyman 20" Vertical Economy Band Saw (Parts)
vertical tool die band saw
Model JM1220
Journeyman Vertical Tool & Die Band Saw (Parts)
vertical tilt-frame bandsaw
Model TF1420
Vertical Tilt-Frame Band Saw (Parts)
concrete cutting band saw
Model CC9000
Vertical Concrete Cutting Band Saw (Parts)
Roll-In Saws are available through a network of distributors.  To find a distributor near you, click here.

 

© 2014 Roll-In Saw • 15851 Commerce Park Dr. Brook Park, Ohio 44142 USA
Phone: 216.459.9001 • Fax: 216.459.9220
Web Design by Vizpro • Webmaster