PART NO. |
DESCRIPTION |
LIST PRICE |
1A40 |
STOP CLAMP, to control depth of cuts |
55.00 |
1A41 |
ANGLE PLATE, graduated block |
131.00 |
1A42 |
C-CLAMP with rod, for angle plate |
126.00 |
1A36 |
UPPER WHEEL - complete with axle, bearings and rubber tire |
327.00 |
1A37 |
LOWER WHEEL - complete with axle, bearings and rubber tire, less 80 tooth spur gear |
346.00 |
167 |
|
BEARING, for upper and lower wheels (2 required per wheel) ea. |
26.00 |
1133 |
|
RUBBER TIRE, for upper and lower wheels (2 required per saw) ea. |
33.00 |
1A48 |
GUIDE ASSEMBLY - complete upper and lower, includes housing, stem, 4 rollers, and 4 bearings |
386.00 |
169 |
|
GUIDE ROLLER BEARING - (4 required per saw) ea. |
43.00 |
175 |
|
3/4" GUIDE ROLLER - for 3/4" maximum blade width (4 required per saw) ea. |
23.00 |
179 |
|
1" GUIDE ROLLER - for 1" maximum blade width (4 required per saw) ea. |
28.00 |
159 |
SEALS - (2 required per gearbox) ea. |
17.00 |
165 |
BEARING, NO. 204
- (2 required per gearbox) ea. |
23.00 |
166 |
BEARING, NO. 303 - (2 required per gearbox) ea. |
28.00 |
1158 |
LONG SHAFT with steel worm, for gearbox |
202.00 |
1159 |
SHORT SHAFT, for gearbox |
107.00 |
1A57 |
GASKETS - (set of 4 small and 1 large) |
15.00 |
162 |
80 TOOTH SPUR GEAR, for lower wheel |
128.00 |
163-A |
24 TOOTH SPUR GEAR, for outer gearbox; short shaft |
71.00 |
170 |
MOTOR, 1 HP, 60 cycle, single-phase 110V/220V |
407.00 |
171 |
MOTOR, 1 HP, 60 cycle, three-phase 220V/440V |
423.00 |
172 |
MAGNETIC STARTER, single-phase |
129.00 |
173 |
MAGNETIC STARTER, three-phase |
193.00 |
1125 |
PULLEY GUARD |
65.00 |
1126 |
PULLEY, 2-3-4-5" step x 5/8" bore for motor |
45.00 |
1128 |
PULLEY, 2-3-4-5" step x 3/4" bore for gearbox |
45.00 |
1131 |
V-BELT-
33" O.D. |
28.00 |
132 |
TABLE, 18 X 30 Blanchard ground |
501.00 |
174 |
WORK LIGHT, - complete |
58.00 |
|
|
LIGHT SHADE, only |
17.00 |
1134 |
HYDRAULIC CYLINDER |
358.00 |
1A142 |
BLADE GUARD |
26.00 |
1A33 |
COUNTERWEIGHT ASSEMBLY |
182.00 |
1A164 |
TENSION ADJUSTMENT HANDLE |
75.00 |
1A15O |
FLAT TRACK ROLLER, with stud |
48.00 |
1A151 |
GROOVED TRACK ROLLER, with bearing and hex head stud |
63.00 |
1A152 |
GROOVED TRACK ROLLER, with bearing and counterweight stud |
63.00 |
154 |
BLADE, 3/4" x 10T x 9', for SF8590 Model |
30.00 |
1X54 |
BLADE, 3/4" x 10T x 10', for EF1459 Model |
32.00 |
1X57 |
BLADE, 3/4" x
8/12 x 10', for EF1459 Model (bi-metal) |
65.00 |
1A95R |
CHIP DUST BLOWER |
80.00 |
1A132 |
CASTERS - (set of 4; 2w/locks) |
121.00 |
1135 |
SIDE PANELS-(pair) |
285.00 |
1A49 |
CONTOUR GUIDE ASSEMBLY - complete |
129.00 |
1257 |
|
CONTOUR GUIDE INSERTS, for 3/8" & 1/2" blades pr. |
18.00 |
1258 |
|
CONTOUR GUIDE INSERTS, for 1/4" blades pr. |
18.00 |
1A160 |
CONTOUR GUIDE ASSEMBLY - complete for 3/4" blades |
132.00 |
1256 |
|
CONTOUR GUIDE INSERTS, for 3/4" blades pr. |
30.00 |
1A185 |
RIP FENCE with RAIL |
78.00 |
1A189 |
QUICK CLAMP with BACK PLATES and table plate |
386.00 |
6A56 |
GEARBOX
- complete (includes 24 tooth outside gear) |
675.00 |
|
|
|
|
Note: Prices shown are for replacement only and cannot be used for computing deductions when machines are ordered without certain parts, not for allowances on parts returned. |
|
|
TERMS: 1% cash 10 days, 30 days net. F.O.B. Brook Park, Ohio. 15% restocking charge on all returned items. |
|
|
PRICES AND SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. |
|
|
WARNING: check all shipments for shortage and damage. Any claims for loss or in-transit damage must be filed with the carrier.
|
|
